Features:

l Ininvasion accurately to 3 m (10 ft):

l Arrange the optical fiber FBG sensor with patented technology along the sensor cable to achieve high detection rate and low false alarm rate;

l Use the adaptive threshold to monitor each FBG sensor in real time;

l Position the perimeter intrusion of multiple sites simultaneously and all connect to a unified security network *:

l No need for outdoor power supply or anti-electromagnetic interference and lightning protection of electronic equipment;

l Each optical fiber is laid along the fence, without winding or double layout;

l Use the software configuration for the detection area to meet the site and security requirements;

l Conization to achieve high toughness of single or multiple cable cuts;

l Integration with the ISMS, VMC, and PSIM platforms.

The originality of the AGIL Fence PIDS

Each fiber Bragg grating (FBG) is a distributed mirror composed of segmented optical fibers used to reflect light at a specific wavelength.

AGIL Fence PIDS uses FBG technology as the main "sensor" than other fiber optic sensor systems, which rely solely on the fiber optic cable itself, for more accurate detection.

These FBG sensors are embedded in fiber-optic cables and then mounted on fences, walls, and drainage grilles.In an attempt to break through physical perimeter safety, any slight movement on the structure caused by cutting, climbing, or lifting creates tension on the nearest sensor, causing a wavelength change.At this point, the triggered sensor will immediately respond to quickly send an alert to the central command center.

Because sensors generate thousands of sensor data points per second, their intelligent signal processing system can support large amounts of data and identify reliable intrusion signals

The FBG ensures the highest detection rate and the lowest false positive rate

Our FBG sensing capability stems from the strain principle, measuring the magnitude of force by applications displaying force on the threshold table.The slow crawling of the intruder would usually does not be detected in most systems, regardless of assistance or not, as the action does not produce strong vibration.However, any form of intrusion into the fence and fence protected by FBG will produce a force to change the spectrum to exert pressure on the nearest sensor.Therefore, any attempt to control or destroy the AGIL Fence PIDS FBG sensor cable will trigger an intrusion alarm.

AGIL Fence Perimeter Intrusion Detection System_UK_FA3_SP_LR.pdf